LaserGlow’s Professional Tooth Gem Kit is a complete etch-and-bond system designed for secure, long-lasting tooth gem retention. It combines 37% phosphoric acid etch, a high-adhesion bonding resin, and a crystal-clear light-cure composite to create professional-grade results without enamel damage when used correctly.
This is the same three-step protocol used by experienced dental and cosmetic professionals to prevent early pop-offs, cloudy glue lines, and weak adhesion. Built for crystals, gold charms, and designer gems, it delivers consistent hold, clean finishes, and predictable results.
405 in stock
Creates optimal enamel micro-roughness to anchor tooth gems securely and support long-lasting professional retention.
Seals etched enamel and forms the critical adhesion layer between tooth and gem. LED cures in 10 seconds.
Crystal-clear light-cure composite that locks gems in place without clouding or dulling the design.
Precise etch, bond, and composite usage per application. Designed for efficient salon, studio, and professional use.
LED curing light required (not included).
This professional tooth gem kit must be used with a dental-style LED curing light to properly polymerize the bond and composite. For best retention and predictable results, pair it with the LaserGlow LED Curing Light .
Tooth gems sold separately. Complete your setup with our Premium Crystal Tooth Gems , including crystals, gold charms, and designer shapes.
A professional tooth gem bonding workflow using etch + dental bond + light-cure composite for stronger retention, clean margins, and long-lasting results.
Etches enamel to create micro-retention so the bonding agent can grip evenly for stronger, longer-lasting tooth gems.
Size: 2.5 ml
Seals the etched enamel and forms the adhesive layer that supports long wear. Light-cure to lock in the bond before placement.
Size: 5 ml
Light-cure composite seats the gem with a smooth, clear finish designed to stay bright under crystals and designer shapes.
Fill: 2 g
Whether you’re placing your first tooth gem or refining a high-retention technique, this professional tooth gem kit is built for clean margins, strong adhesion, and consistent results. With proper prep, correct LED curing, and a full etch–bond–composite system, you can achieve secure, long-lasting tooth gem applications that look polished and intentional—not rushed or amateur.
A clean, professional tooth gem application workflow designed for strong retention and long-lasting results. Full training is included in your digital guide.
Isolate lips and cheeks and dry the tooth completely.
Apply etch, then rinse or wipe until enamel appears uniformly frosted.
Apply a thin coat, gently air-thin, then LED cure for 10 seconds.
Use a minimal amount of flowable composite and position the tooth gem precisely.
Cure from the front and at an angle for complete polymerization.
Check margins and gloss. Advise gentle brushing and avoiding hard foods for 24 hours.
Enter your email to get instant access to our complete tooth gem protocol guide, including the “locked” steps, advanced retention tips, curing angles, and aftercare that reduces pop-offs.
Best practice: deliver the PDF via your Omnisend flow after signup. This button is here so you can test immediately and/or keep it available on-page.
Exclusive knowledge. Better retention. Fewer “it popped off” messages.
Etch • Bond • Light-Cure Composite (Not Craft Glue)
Preps enamel so the bonding system grips and holds longer.
Professional protocol: etch → bond → composite.
Glue-only kits rely on smooth enamel. More pop-offs.
Creates the adhesive layer that improves hold and consistency.
Stronger interface with less edge lifting.
No bond step means higher failure rates.
Seats gems cleanly and cures hard for long-lasting wear.
Controlled placement with durable curing.
Glue cures unevenly and breaks down faster.
A full bonding system for flat-backs, metal charms, and logos.
Same protocol for crystals, gold, and custom designs.
Glue struggles with heavier or metal-backed gems.
Longevity depends on prep, isolation, and curing technique.
Full protocol delivers consistent wear.
Shortcuts reduce retention.
Skip the guesswork with a complete tooth gem starter solution. Both the $250 Starter Bundle and $500 Pro Bundle include everything needed for secure, long-lasting application. Start with the Starter to learn the workflow, or choose Pro to scale faster with higher-ticket client work.
Quick answers about the LaserGlow Professional Tooth Gem Bonding Kit and the Etch • Bond • Light-Cure Composite system (not craft glue).
| Application | Professional-grade system for trained users and DIY |
|---|---|
| Compliance | MSDS / ISO / CE |
| Materials | 37% phosphoric acid etch (5 ml), Primo V bond, light-cure flowable composite (2 g) |
| Shelf Life | 24 months (keep sealed, cool, away from light) |
| Recommended Devices | LED curing light (front + angled exposure) |
Your cart is currently empty.
Not sure where to start?
Try these collections:
405 in stock
LaserGlow’s Professional Tooth Gem Kit is a complete etch-and-bond system designed for secure, long-lasting tooth gem retention. It combines 37% phosphoric acid etch, a high-adhesion bonding resin, and a crystal-clear light-cure composite to create professional-grade results without enamel damage when used correctly.
This is the same three-step protocol used by experienced dental and cosmetic professionals to prevent early pop-offs, cloudy glue lines, and weak adhesion. Built for crystals, gold charms, and designer gems, it delivers consistent hold, clean finishes, and predictable results.
